• Kit contains illuminator with built-in cooling fan, 75- watt Halogen lamp, fiber bundle and twinkle wheel
• Create unique star ceiling effect lighting for up to 100 square feet with one kit (multiple kits can be used for larger areas)
• Fibers carry no heat and once installed, require no maintenance
• Select between standard length (8-12 feet) and long length (16-20 feet) fiber bundles
• Fiber bundle is securely fastened to the connector preventing any fibers from coming loose
• Optional color wheel available (special order)
• All 300 fiber ends are polished
• Dimensions: 8.5" x 6.5" x 5" -- Be sure to allow 12" clearance around the illuminator to dissipate heat and ensure safety

Note: Access above the ceiling or behind the wall/surface is necessary to attach the fiber strands.

1. Drill 1/16" holes through the ceiling/surface where fiber star points are to be located. Drill bit is not included.
2. Insert fiber optic strands through the ceiling/surface, making sure to leave 4" or more of fiber exposed on the viewing side.
3. Secure the fiber strands in each drilled hole by using a silicon or epoxy adhesive. Let the adhesive stand for 24 hours before proceeding unless using a quick-drying epoxy.
4. Paint ceiling/surface the desired color.
5. Clip excess fiber off so that end of fiber is now flush with ceiling/surface.
6. Insert fiber optic coupler into the illuminator.
7. Plug the illuminator into a 120-volt AC outlet and turn the rocker switch to the "On" position.